VenGuard Home kit

For your home kitchen. It senses gas, closes the cylinder valve by itself, and you reset it in 10 seconds.

VenGuard Home kit: valve, control unit and detector

In the box

Four parts, one safety chain.

  • Gas detector. Mounted low, because LPG is heavier than air. Shows its state with an 85 dB buzzer and status lights.
  • Automatic valve. Brass body, spring-loaded closing, manual reset lever.
  • Active Ventilation Relay. Designed to switch on the kitchen exhaust fan when a leak is confirmed, to push the gas outside.
  • Batteries. Li-ion cell in the detector, 2 × AA in the valve — shutting off the gas needs no mains power.

Installation

A few minutes, no pipe work.

Standard barbed fittings and jubilee clamps. No changes to gas pipes or cylinder threads.

How VenGuard is installed The VenGuard valve sits right after the cylinder regulator, then the hose runs to the stove. The detector sits at cylinder height within 1.5 m; it signals the valve by radio and the relay wirelessly; the relay switches on the exhaust fan. Cylinder Regulator VenGuard valve Long hose Stove Detector ≤ 1.5 m Radio Wireless, no internet Relay Exhaust fan (mains) 1 2 3 4
Schematic, not to scale. Numbers match the steps.
  1. Turn off the cylinder

    Switch the regulator off.

  2. Fit the valve

    Following the picture guide, fit the valve on the line after the regulator and tighten the clamps.

  3. Connect the relay to the fan

    Connect the ventilation relay to the kitchen exhaust fan's supply. If you are not used to electrical work, our team or a dealer will do it.

  4. Place the detector, test

    Mount the detector low and press the test button to see the valve close and the fan start.

Prefer not to do it yourself? Our team or an authorised dealer will install it.

Specifications

Technical data

Values are marked “Testing in progress” until confirmed by testing.

VenGuard Home kit specifications
DetectsLPG (cooking gas)
Works withLPG cylinders of any brand (Bashundhara, Omera, Jamuna, TotalEnergies and others): the valve fits on the gas line after the regulator. On piped gas (Titas)? Talk to us first.
SensorWinsen MP-5
TriggerAbove 20% LEL continuously for 7 seconds (to ignore cooking fumes)
Valve closing timeDesigned for under 1 second Testing in progress
Detector–valve link2.4 GHz point-to-point radio, no internet Testing in progress
PowerDetector: Li-ion cell · Valve: 2 × AA Testing in progress
VentilationActive Ventilation Relay: switches on the exhaust fan when a leak is confirmed (the fan needs mains power) Testing in progress
Alarm85 dB buzzer, status lights, Bangla instruction placard
ResetManual lever at the stove, about 10 seconds
Valve bodyBrass; leak-tested at 1.5× working pressure
EnclosuresFlame-retardant ABS
CertificationIn progress: BUET BRTC, BTRC, Dept. of Explosives, BSTI

Price

Take the complete kit, or build it up.

FULL PROTECTION

Complete Home kit

BDT 3,500 one time

  • Detector + ventilation relay + automatic valve
  • Senses gas, starts the fan, shuts off the gas by itself
  • BDT 100 less than buying the parts separately
MODULAR START

Detector + Relay

BDT 1,900 one time

  • 24/7 gas sensing and an 85 dB alarm
  • Switches on the exhaust fan on a leak
  • Add the valve any time: BDT 1,700

Without the valve, the gas is not shut off automatically.

Pre-order
OPTIONAL ADD-ON

Connected plan

BDT 550 / year

  • Close the valve from your phone
  • SMS alerts to family
  • Landlord dashboard

Prepaid via bKash/Nagad. Core safety works fully without it.

Open the app

Reserve your VenGuard Home

BDT 500 deposit, fully refundable. The kit is BDT 3,500 and the deposit comes off the price. We call to confirm before delivery. Deliveries planned from March 2027, after testing and certification.

Pre-order